Assembly and usage instructions
The GYMBOX™ is a modular cube which is available in two sizes:
80*80*80 cm (32 inches cube) and 100*100*100 cm (39 inches).
The cube opens up to 6 square phases and becomes a padded mattress that combines several elements on its surface: balls pool, cylinders in various sizes, seesaws, stairs, a slope for climbing up and sliding down, crawling tunnel and balancing plane.
The unique feature on the GYMBOX is that it can be put together in a compact cube shape, adjusted and intended for indoor use. The different features of the GYMBOX are combined together and attached to the outer case by Velcro straps; they are easy to open up and can be put together for play in various combinations.
The GYMBOX is easy and simple to arrange, to assemble and to put back together. After the product is opened, the different features should be arranged by the color of the Velcro straps on the mattress. There is a match between the color of the Velcro and the color of the feature. Some features can be put in different places at will.
|
Moving or carrying the GYMBOX (figure no. 1)
The GYMBOX has two carrying handles on the sides.
There are two ways to move or carry the GYMBOX:
1 If two people carry the GYMBOX – The GYMBOX must be turn around so that the handles are on the sides of the cube, near the top, and then it is carried by holding the handles on each side.
2 If one person is carrying the GYMBOX – bend down and hold the handles on both sides and then lift or tow it.
|
|
 |
Opening and assembling the GYMBOX (figure no. 2)
1: Open the Velcro of the sides of the different squares.
2: Remove the stairs and the small semi cylinder that areattached to the slide and put them together according to the color of the Velcro (e.g. red stair to red Velcro, and blue stair to blue Velcro).
3: Removing the balls pool from the square it is attached to in the cube to the central square of the mattress according to the color of the Velcro on the mattress (e.g. yellow).
4: Move the slide slightly to the center of the square according to the color of the Velcro on the mattress (e.g. red).
5: Arrange the rest of the features according to figure no. 2*, and arrange them later in different forms to play.
*- The GYMBOX 100 * 100 * 100 contains two large cylinders instead of one large and two small cylinders.
|
|
Folding and packing the GYMBOX
1: Disassemble the balls pool and put it on the next side, around the balance plane. Slightly remove the slide to the edge of the square (the far end from the balance plane). Insert the big stair and the small half cylinder into the tunnel of the slide. Put the small stair in the seat of the slide. Remove the rest of the features from the mattress. figure no. 3.
|
 |
 |
2: Lift the square that balls pool and the balance plane are attached to, using the outer handle, fold it (rotate it towards the slide) and attach it to the slide. Lift and fold the rest of the squares, and attach them to each other by the Velcro to make a cube around the slide (except of the square which is the "lid" of the cube). Figure no. 4. |
| 3: Put the two half circles one on top of the other (with the open facing upwards), near the side, on the slide's slope and next to the stair. Figure no. 5. |
 |
 |
4: Put the big half cylinder, flat face upwards so that part of it is laid on the red stair and the rest in the half circle. Put the big cylinder next to the big half cylinder, by the side of the cube. Put the two small cylinders on the other side of the big half cylinder. Close the GYMBOX to a cube by placing the remaining square and securing it by the Velcro. Figure no. 6, figure no. 1.
|
Safety precautions for usage:
All the safety precautions that are specified on the label which is glued to the product must be kept.
Playing and climbing on the cube without adult supervision is forbidden.
When used the GYMBOX must be placed on a carpet or a soft surface.
- Just like other mattresses the GYMBOX should be turned around from time to time and place on different squares to preserve its shape.
- The GYMBOX is meant to be used indoors. It is important to remember that it is not durable in rain, humidity, and sun light.
- It is recommended not to allow activity in the GYMBOX while wearing shoes.
- The GYMBOX should be cleaned with soapsuds . The sponges must not be taken out of the covers and the covers must not be laundered in any way.
The GYMBOX is manufactured in high quality and is produced according to meet the demands of international standards of safety regulations: ASTM F963 08,CPSIA (HR4040),PROP 65 for LEAD and Phthalates, EN71
The GYMBOX website www.GYMBOXusa.com presents instruction program, exercises for ages 0-6, essays and activities that help you to fulfill the full potential of the product.
The GYMBOX is complemented with a psychologist and development specialist so further consultation on E-mail or on the telephone after the purchase is also possible. We are always happy to serve you: All rights reserved to GYMBOX LTD, P.O box 99 Kefar Daniel , Israel. Patent Pending & Design.
|
